Rig List...

Mud Bay Drilling has the following equipment:
Truck and track mounted auger and mud rotary drill rigs Sonic truck and track mounted drill rigs Portable rigs designed for confined spaces and low overhead conditions Direct push (Geoprobe) soil sampling equipment		Raft mounted drill for water access sites. Portable 8 ft. x 16 ft. raft for sites (ponds) not readily accessible with other equipment Equipment and tooling for "ODEX" drilling techniques (available on most rigs)

SONIC Drill Rigs

SONIC DB320 Our DB320 is a compact, lightweight drill rig specially designed for sonic drilling through unconsolidated material. It has been optimized to extract more competent/pristine core samples in sand, clay or gravel than is usually possible with traditional coring tool techniques.

Specs:

Height:		9' 5" (2.86m) mast down 26' (7.92m) mast raised
Length:		24' (7.32m) w/mast
Width:		6' 8" (1.8m) deck width
Weight:		26,566 lbs (12,050 kg)
Ground Pressure:		5.4 psi
Climbing:		60% (30°)
Sound Level:		< 76dbA @ 10m

Equipped:		Skid Steer (Bobcat) for support
		Rotary Safety Guards
		Rod / Casing Handler
		SPT Auto-hammer

Capable of:		Continuous 4"x6" Sonic Soil Sampling to 50m (164 ft)
		Angle drilling
		Iso-Flow sampling
		All Geotechnical Testing: - SPT, Shelby, Vane Testing - Deploying CPT
		7" and 8" core barrels available

SONIC ATV Our ATV Sonic Drill Rig (mounted on a Rubber Tracked IHI carrier) is supported by a twin IHI carrier (tooling and supply storage). It allows access for a full-sized Roto-Sonic Drill to challenging locations. Whether the site is hilly terrain or soft muskeg, this versatile Sonic Drill can provide the comprehensive soil characterization that only a continuous Sonic soil core supplies.

Specs:

Height:		11' 7" (3.6m) mast down 34' 0" (10.4m) mast raised
Length:		24' 0" (7.3m) mast up
Width:		8' 6" (2.6m) deck width
Weight:		40,700 lbs (18,500 kg) 500 US gal. water
Ground Pressure:		5.5 psi

Equipped:		Rotary Safety Guards
		SPT Auto-hammer

Capable of:		Continuous 4"x6" Sonic Soil Sampling to 150m (500 ft)
		Angle drilling
		Iso-Flow sampling
		All Geotechnical Testing: - SPT, Shelby, Vane Testing - Deploying CPT
		7" and 8" core barrels available

SONIC TRUCK Our truck-mounted, full-sized Roto-Sonic Drill allows quick mobile access to a variety of locations. This powerful Sonic Drill provides excellent continuous soil core recovery in all overburden soil conditions (silt, sand, gravels, glacial tills) for all environmental and geotechnical programs.

Specs:

Height:		37' 0" (11.3m) mast raised
Length:		28' 0" (8.5m)
Width:		8' 6" (2.6m)
Weight:		47,300 lbs (21,500 kg)

Equipped:		Rotary Safety Guards
		SPT Auto-hammer
Auxiliary Equipment:		Tandem Axle Box Truck for tooling and supplies - 51,920 lbs (23,550 kg) GVW

Capable of:		Continuous 4"x6" Sonic Soil Sampling to 150m (500 ft)
		Angle drilling
		Iso-Flow sampling
		All Geotechnical Testing: - SPT, Shelby, Vane Testing - Deploying CPT
		7" and 8" core barrels available

Track-Mounted Drill Rigs

FRASTE MULTIDRILL XL Mounted on Morooka Rubber Tracked Carrier.

Specs:

Height:		12' 0" (3.66m) mast down 31' 0" (9.45m) mast raised
Length:		28' 0" (8.54m) tower down 18' 0" (5.49m) body length
Width:		9' 0" (2.75m) deck width
Weight:		37,000 lbs (16,800 kg)
Ground Pressure:		5.25 psi (4.6 psi at 6" penetration)

Equipped:		Centerline Mono Mud Pump & 435 Bean Pressure Pump
		IR 400/200 air compressor
		Rubber tracks
		Double clamp systems for breaking rod joints
		140 lb automatic SPT hammer
		2 winch lines
Auxiliary Equipment:		Hitachi C45G rubber tracked support unit - provides drill rod and casing storage as well as a water tank

Capable of:		Mud rotary
		Diamond drilling coring
		ODEX casing systems
		Auger (solid stem & hollow stem)
		Automatic dynamic cone penetration (DCPT)
		Angle drilling
		In-situ testing, CPT

MARL M1.3T This versatile rig is equipped with independent hydrostatic drive. The rubber coated steel tracks allow access to difficult sites whether it's soft hilly terrain, under a service station canopy or in tight congested warehouse conditions.

Specs:

Height:		8' 2" (2.49m) mast raised
Length:		6' 4" (1.93m) mast raised
Width:		3' 0" (0.91m)
Weight:		2,075 lbs (941 kg)
Ground Pressure:		2.7 psi
Torque:		1,300 ft/lbs

Equipped:		48" stroke
		Lombardini diesel engine
		Rubber coated tracks

Capable of:		Augering (solid stem & hollow stem)
		Dynamic probing & sampling
		ODEX drilling

MARL M-5T This versatile rig is equipped with independent hydrostatic drive and rubber coated steel tracks allowing access to difficult sites such as under service station canopies and tight congested warehouse conditions. This rig maneuvers well on soft, hilly terrain.

Specs:

Height:		10' 6" (3.21m) w/o crown 12' 2" (3.71m) w/ crown 7' 6" (2.26m) mast down
Length:		12' 0" (3.6m) mast down
Width:		5' 0" (1.5m)
Weight:		12,100 lbs (5,488 kg)
Ground Pressure:		6 psi (4 psi at 6" penetration)
Torque:		6,000 ft/lbs

Equipped:		72" stroke
		4 hydraulic stabilizers
		Isuzu diesel engine
		4,000 lb capacity winch
		Rubber coated tracks

Capable of:		Augering (solid stem & hollow stem)
		Dynamic probing & sampling
		DCPT with automatic 140 lb trip hammer
		ODEX casing systems

MARL M-5 Mounted on a Bombardier Muskeg Carrier.

Specs:

Height:		8' 2" (2.49m) mast down 23' 0" (7.01m) mast raised 14' 5" (4.40m) feed frame only
Length:		18' 6" (5.64m) mast down
Width:		7' 6" (2.29m)
Weight:		16,000 lbs (7,257 kg)
Ground Pressure:		2.75 psi
Torque:		6,000 ft/lbs

Equipped:		4 cylinder Perkins Diesel engine
		2,000 lb hydraulic winch
		4,000 lb hydraulic winch
		140 lb SPT hammer on safety drive winch
		4 hydraulic stabilizers

Capable of:		Augering (solid stem & hollow stem)
		Conducting dynamic cone penetrations using a hydraulic 140 lb automatic trip hammer
		ODEX casing systems
		In-situ testing, CPT

Truck-Mounted Drill Rigs

MARL M-10 Mounted on Ford F800 with 210HP diesel power.

Specs:

Height:		18' 6" (5.67m) rams up only 34' 6" (10.52m) mast raised 12' 6" (3.81m) mast down
Length:		28' 0" (8.54m)
Width:		8' 6" (2.59m) deck width 10' 6" (3.20m) between mirrors
Weight:		30,865 lbs (14,000 kg) GVW
Torque:		10,000 ft/lbs

Equipped:		4 hydraulic stabilizers
		140 lb SPT auto hammer
		2 hydraulic winches

Capable of:		Drilling to 100 ft with hollow stem auger and solid stem auger
		DCPT testing with hydraulic 140 lb automatic trip hammer
		In-situ testing, CPT
		ODEX casing systems

MOBILE B-80 Mounted on Ford F800 4WD with 210HP diesel power.

Specs:

Height:		13' 4" (4.06m) mast down 29' 7" (7.62m) mast raised
Length:		30' 6" (9.3m)
Width:		8' 6" (2.59m) deck width 10' 6" (3.20m) between mirrors
Weight:		30,865 lbs (14,000 kg) GVW
Torque:		7,600 ft/lbs 8 speed top head drive

Equipped:		14 ft stroke
		4x5 Gardner Denver mud pump
		12,000 lb main winch
		900 lb safety driver winch - auxiliary
		140 lb SPT auto hammer
		4-wheel drive
		Rotation cage

Capable of:		Mud rotary
		Coring (HQ3) Diamond drill coring
		Auger (solid stem & hollow stem)
		Automatic dynamic cone penetration (DCPT)
		In-situ testing, CPT
		ODEX casing systems

Hydro-Excavation / Vacuum Unit

DITCH WITCH FX30 This hydro-excavation/vacuum unit is ideal for applications where a quiet, high capacity unit is required for hydro-excavation of buried utility verification, and drilling mud cleanup and disposal.

Specs:

Height:		7' 6" (2.29m)
Length:		21' (6.4m)
Width:		8' 6" (2.59m)

Equipped:		28 HP Kubota diesel engine @ 73dbA
		Blower develops 500CFM of airflow up to 15" (380mm) vacuum force
		High pressure water (up to 3,000 psi @42gpm) for soil excavation
		Trailer mounted with 800 gallon capacity
		100 ft (30m) of suction hose

Rig List...

Mud Bay Drilling has the following equipment:

SONIC Drill Rigs

Track-Mounted Drill Rigs

Truck-Mounted Drill Rigs

Hydro-Excavation / Vacuum Unit

SITE SECTIONS...

REQUEST AN ESTIMATE...

Click Here to Request an Estimate on Your Next Drilling Program!

KEEP UP TO DATE...